Follow up from previous elog:
https://logbook.xray.aps.anl.gov/8id/8-ID/743
5/9/2022
As shown below, it works but he wanted to use a beamline Linux station
to run the camera and this would require a USB3 extender.
In the end, he bought a new GigE color camera.
2) https://www.flir.com/products/chameleon3-usb3/?model=CM3-U3-28S4C-CS Also color USB3.
Chameleon3 USB3
Model: CM3-U3-28S4C-CS: 2.8 MP, 13 FPS, Sony ICX818, Color
Pixel Size: 3.69
Resolution: 1928 × 1448
Sensor Type: CCD
Sensor Format: 1/1.8"
Re: BCDA confirmed software support of CCD camera
Zhang, Qingteng <[email protected]>
Fri 5/6/2022 12:17 PM
To: Dufresne, Eric <[email protected]>
Cc: Jensen, Don P., Jr. <[email protected]>;Ziegler, Raymond <[email protected]>;
Narayanan, Suresh <[email protected]>
2 attachments (8 MB)
MicrosoftTeams-image.png; PXL_20220506_170135572.jpg;
Eric:
Mark (Engbretson) got the camera working in the BCDA lab. It came in full color mode!
I'll work with Mark to see if it's possible to run a USB extension cable
from the camera to any of the Linux workstations outside the hutch.
Thanks again for the gift,
QZ |