Source:
8idpixirad% ls -l /home/beams/DUFRESNE/8ID/CedratPiezoShutter
total 36
drwxr-xr-x 2 dufresne xsddys 4096 Sep 7 2018 090618-CyclingRate/
drwxr-xr-x 3 dufresne xsddys 4096 Sep 7 2018 090618-DrawingStepPDF-FPS400M/
drwxr-xr-x 5 dufresne xsddys 4096 Dec 16 2020 Drawings-DonJensen/
drwxr-xr-x 3 dufresne xsddys 4096 Jun 15 2022 Manual/
drwxr-xr-x 2 dufresne xsddys 4096 Sep 7 2018 OrderInformation-090718/
drwxr-xr-x 2 dufresne xsddys 4096 Sep 6 2019 QA-CedratData-Scanned-090619/
drwxr-xr-x 2 dufresne xsddys 4096 May 3 11:20 StageStackParker-050323/
drwxr-xr-x 2 dufresne xsddys 4096 Jul 12 2019 SwissShutterChamber-2008/
drwxr-xr-x 2 dufresne xsddys 4096 Mar 16 23:44 Tests-March2023/
https://logbook.xray.aps.anl.gov/8id/8-ID/752 Major other elogs on the Swiss shutter
From: Dufresne, Eric
Sent: Tuesday, May 2, 2023 4:06 PM
To: [email protected] <[email protected]>
Cc: Wakefield, Kevin J <[email protected]>
Subject: Horizontal slide purchase record
Hi Soonhong,
we had an email exchange in 2019 when we upgraded our shutter to a new company.
I have a question about the slides purchased to move the chamber, the horizontal slide,
part #4 in the drawing attached. Would you have a record of what was purchased?
Thanks in advance,
Eric
FW: RFQ
Sandy, Alec R.
Wed 5/3/2023 8:48 AM
To: Dufresne, Eric <[email protected]>
1 attachments (99 KB) 280059daedelAlecsandy.doc;
Eric,
I am pretty sure these are the stages for shutter chamber.
- Alec
From: Asandy <[email protected]>
To: [email protected]
Sent: Tue, 22 Apr 2008 9:25 am
Subject: RFQ
Hello,
Can you please send me a quote for the following:
Quantity 2 of ZP200T01MS-D2H11L11C3M3E1B1R1P1
Parker Daedal vertical lift wedge table, 25mm travel, standard grade, 5mm lead ground ballscrew,
N.C. current sinking home sensor pack, N.C. current sinking limit sensor pack, 0.25 inch bore
Bellows coupling, N23/SM23 motor mount, no encoder, no shaft break, class 1000 clean room compatible
Quantity 2 of 106004CT-EP-D1L2C4M1E1
Parker Daedal cross roller linear table, 4 inch travel, imperial mounting, precision grade,
0.02 inch lead drive screw, reed limit and home switches, NEMA 23 mortor mounting, no encoder
- Alec
From: [email protected] <[email protected]>
Date: Tuesday, April 22, 2008 at 11:46
To: Sandy, Alec R. <[email protected]>
Subject: Re: RFQ
Alec,
Please see attached information, if there is anything else we can help you with please contact us.
Lenora Bergonia
Automation Equipment Co. |