|
8-ID
|
| 8-ID Beamline logbook mirror |
Not logged in |
 |
|
|
|
|
|
Message ID: 38
Entry time: Fri Mar 17 14:40:59 2006
Reply to this: 40
|
| Author: |
Alec |
| Type: |
8-ID General |
| Category: |
Beamline Hardware |
| Subject: |
Axis 241Q video server |
|
|
- An Axis 241Q video server has been placed on our network. Currently, its IP address is 164.54.116.175 and its host name cymophane (though I have not figured out how to access it via its host name).
- There is a link to the video server from the 'Local' section of our web page. Alternatively, use this link: http://164.54.116.175/view/index.shtml
- The manual for installation and the user guide are attached below.
- Some salient points are as follows:
(1) Basically you just access the web site listed above to connect to the video server
(2) A connection via IE provides additional functionality provided you connect with adminsitrator rights (the first time anyway) so that you can install the MPEG-4 decoder
(3) The MPEG-4 stream uses less bandwidth than the Motion JPEG but does require the decoder
(4) From a Windows PC and MPEG-4, you can save images and zoom the display to full screen
- root and sandy are adminstrator login names. The password is available locally (it is the usual I user account password)
|
|
|