8-ID
|
8-ID Beamline logbook mirror |
Not logged in |
|
|
Message ID: 696
Entry time: Thu Jan 23 11:35:15 2020
|
Author: |
Joe Strzalka |
Type: |
8-ID-"G" |
Category: |
GIXS PUP Auto-Sample Changer |
Subject: |
GIXS Multi-Sample Vacuum Chamber Overview |
|
|
This entry organizes information about the multi-sample vacuum sample chamber for GIXS static measurements, and also for some in situ measurements.
A. Overview: see attachment 1 (static) and attachment 2 (in situ thermal control and electrical measurements)
B. internal beamstop entry 447/mirror 447
C. Axis P5534 Network Camera for monitoring sample: entry 559/mirror 559
D. Accu Glass vacuum pressure relief valve, rated for 0.5 psi, installed by default on base of chamber
E. Mounting non-standard sample holders into GIXS chamber entry 613/mirror 613
F. For engineers/designers: Attachment 3 has information about accessing 3D models
G. Practical sample considerations for users of Linkam thermal stage: entry 706/mirror 706
H. Setup Description
.......EPICS support via RS232 8ide:asyn_17.
.......Connect cable to RS232 port on back of unit. Need RJ-47 to DB-9 and mini gender changer (all pi...ns)
.......Use controls on front panel to set baud rate: Menu > Communications > Baud = 38400, 8 data bits, no parity, no flow control
I. BCDA Support details: See Attachment 4, or Attachment 5 combines Attchmt 1 and 4, Attchmt 6 is manual for vsamx/vsamy |
|
|
|
|
|
|